Store LocatorStore Locator

Celebrate Spring with Creative Birdhouse Planter Projects

Spring has sprung, so let’s celebrate!

Welcome the arrival of spring with birdhouse kits transformed into a
 vertical herb garden, a fresh floral centrepiece, and a welcoming front door.

What You’ll Need

• mitre saw 1347-117

• birdhouse kits from homehardware.ca 5458-293

• BeautiTone paint and/or stainoptional shingles

• 1” x 8” pine

• hot glue gun 2047-144

• glue sticks 2047-243

• non-toxic oil 4548-181

Here’s How

With the exception of the roofs, assemble the birdhouses according to instructions.

Note: The roofs do not use the upper supports.

Roofs

Cut out a section of the roofs for planting or floral arrangements. If hanging the birdhouses on a wall, fence, or door, ensure the roofs are flush to the backs with an overhang in the fronts.

Shingles (optional)

Make shingles from 2” length blanks of 1” x 8” pine. Set a compound mitre saw at 3 degrees and cut thin wedge slices across the 2” width, turning the blanks over after each cut.

Safety note: When the board gets to be 3” or 4” in length, discard and start a new blank. Use hot glue to attach shingles to roof. Treat shingles with non-toxic oil.

unknown legacy asset
unknown legacy asset
unknown legacy asset
unknown legacy asset

Inspiration is always handy

© 2018 Home Hardware Stores Limited. All rights reserved.